Black Box LGB6026A, Management Manual

Page: 341 / 1289

– 339 –
C
HAPTER
14 | Security Measures
IP Source Guard
■
SIP-MAC – Enables traffic filtering based on IP addresses and
corresponding MAC addresses stored in the binding table.
◆
Max Binding Entry – The maximum number of entries that can be
bound to an interface. (Range: 1-5; Default: 5)
This parameter sets the maximum number of address entries that can
be mapped to an interface in the binding table, including both dynamic
entries discovered by DHCP snooping (see
"DHCP Snooping" on
page 343 ) and static entries set by IP source guard (see "Configuring
Static Bindings for IP Source Guard" on page 339 ).
W
EB
I
NTERFACE
To set the IP Source Guard filter for ports:
1. Click Security, IP Source Guard, Port Configuration.
2.
Set the required filtering type for each port.
3. Click Apply
Figure 182: Setting the Filter Type for IP Source Guard
C
ONFIGURING
S
TATIC
B
INDINGS FOR
IP
S
OURCE
G
UARD
Use the Security > IP Source Guard > Static Configuration page to bind a
static address to a port. Table entries include a MAC address, IP address,
lease time, entry type (Static, Dynamic), VLAN identifier, and port
identifier. All static entries are configured with an infinite lease time, which
is indicated with a value of zero in the table.
CLI R
EFERENCES
◆
"ip source-guard binding" on page 787