Black Box LGB6026A, Management Manual

Page: 1053 / 1289

– 1051 –
C
HAPTER
44 | DHCP Commands
DHCP Server
default-router
This command specifies default routers for a DHCP pool. Use the no form
to remove the default routers.
S
YNTAX
default-router address1 [ address2 ]
no default-router
address1 - Specifies the IP address of the primary router.
address2 - Specifies the IP address of an alternate router.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
DHCP Pool Configuration
U
SAGE
G
UIDELINES
The IP address of the router should be on the same subnet as the client.
You can specify up to two routers. Routers are listed in order of preference
(starting with
address1 as the most preferred router).
E
XAMPLE
Console(config-dhcp)#default-router 10.1.0.54 10.1.0.64
Console(config-dhcp)#
dns-server
This command specifies the Domain Name System (DNS) IP servers
available to a DHCP client. Use the
no form to remove the DNS server list.
S
YNTAX
dns-server address1 [ address2 ]
no dns-server
address1 - Specifies the IP address of the primary DNS server.
address2 - Specifies the IP address of the alternate DNS server.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
DHCP Pool Configuration
U
SAGE
G
UIDELINES
◆
If DNS IP servers are not configured for a DHCP client, the client cannot
correlate host names to IP addresses.