Black Box LGB6026A, Management Manual

Page: 290 / 1289

– 288 –
C
HAPTER
14 | Security Measures
Configuring HTTPS
2. Select Show Information from the Step list.
3.
Use the sort key to display addresses based MAC address, interface, or
attribute.
4. Restrict the displayed addresses by entering a specific address in the
MAC Address field, specifying a port in the Interface field, or setting the
address type to static or dynamic in the Attribute field.
5.
Click Query.
Figure 149: Showing Addresses Authenticated for Network Access
C
ONFIGURING
HTTPS
You can configure the switch to enable the Secure Hypertext Transfer
Protocol (HTTPS) over the Secure Socket Layer (SSL), providing secure
access (i.e., an encrypted connection) to the switch’s web interface.
C
ONFIGURING
G
LOBAL
S
ETTINGS FOR
HTTPS
Use the Security > HTTPS (Configure Global) page to enable or disable
HTTPS and specify the UDP port used for this service.
CLI R
EFERENCES
◆
"Web Server" on page 726
C
OMMAND
U
SAGE
◆
Both the HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure both services to use the same
UDP port. (HTTP can only be configured through the CLI using the
ip
http server command described on page 727 .)