Black Box LGB6026A, Management Manual

Page: 618 / 1289

– 616 –
C
HAPTER
23 | Using the Command Line Interface
CLI Command Groups
CLI C
OMMAND
G
ROUPS
The system commands can be broken down into the functional groups
shown below
.
Table 33: Command Group Index
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
619
System Management Display and setting of system information, basic modes
of operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, and the system clock
627
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
671
Remote Monitoring Supports statistics, history, alarm and event groups 691
Flow Sampling Samples traffic flows, and forwards data to designated
collector
699
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management
access through the web server, Telnet server and
Secure Shell; as well as port security, IEEE 802.1X port
access control, and restricted access based on
specified IP addresses
705
General Security
Measures
Segregates traffic for clients attached to common data
ports; and prevents unauthorized access by
configuring valid static or dynamic addresses, web
authentication, MAC address authentication, filtering
DHCP requests and replies, and discarding invalid ARP
responses
755
Access Control List Provides filtering for IPv4 frames (based on address,
protocol, TCP/UDP port number or TCP control code),
IPv6 frames (based on address, DSCP traffic class, next
header, or flow label), or non-IP frames (based on MAC
address or Ethernet type)
801
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
823
Link Aggregation Statically groups multiple ports into a single logical
trunk; configures Link Aggregation Control Protocol for
port trunks
839
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the performance
of the monitored port
849
Rate Limit Controls the maximum rate for traffic transmitted or
received on a port
853
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
855
Spanning Tree Configures Spanning Tree settings for the switch 861
VLANs Configures VLAN settings, and defines port membership
for VLAN groups; also enables or configures private
VLANs, and protocol VLANs
885
Class of Service Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP traffic
types, IP precedence, and DSCP
925