Black Box LGB6026A, Management Manual

Page: 109 / 1289

– 107 –
C
HAPTER
4 | Basic Management Tasks
Displaying Switch Hardware/Software Versions
D
ISPLAYING
S
WITCH
H
ARDWARE
/S
OFTWARE
V
ERSIONS
Use the System > Switch page to display hardware/firmware version
numbers for the main board and management software, as well as the
power status of the system.
CLI R
EFERENCES
◆
"System Management Commands" on page 627
P
ARAMETERS
The following parameters are displayed in the web interface:
Main Board Information
◆
Serial Number – The serial number of the switch.
◆
Number of Ports – Number of built-in ports.
◆
Hardware Version – Hardware version of the main board.
◆
Internal Power Status – Displays the status of the internal power
supply.
Management Software Information
◆
Role – Shows that this switch is operating as Master or Slave.
◆
EPLD Version – Version number of EEPROM Programmable Logic
Device.
◆
Loader Version – Version number of loader code.
◆
Diagnostics Code Version – Version of Power-On Self-Test (POST)
and boot code.
◆
Operation Code Version – Version number of runtime code.
◆
Thermal Detector – The first detector is near the air flow intake vents
on both models. The second detector is near the switch ASIC on the
ESC4610-26T and near the physical layer ASIC on the ESC4610-50T.
◆
Temperature – Temperature at specified thermal detection point.
W
EB
I
NTERFACE
To view hardware and software version information.
1. Click System, then Switch.