Black Box LGB6026A, Management Manual

Page: 918 / 1289

– 916 –
C
HAPTER
38 | VLAN Commands
Configuring IP Subnet VLANs
mapping is found, the PVID of the receiving port is assigned to the
frame.
◆
The IP subnet cannot be a broadcast or multicast IP address.
◆
When MAC-based, IP subnet-based, and protocol-based VLANs are
supported concurrently, priority is applied in this sequence, and then
port-based VLANs last.
E
XAMPLE
The following example assigns traffic for the subnet 192.168.12.192, mask
255.255.255.224, to VLAN 4.
Console(config)#subnet-vlan subnet 192.168.12.192 255.255.255.224 vlan 4
Console(config)#
show subnet-vlan
This command displays IP Subnet VLAN assignments.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use this command to display subnet-to-VLAN mappings.
◆
The last matched entry is used if more than one entry can be matched.
E
XAMPLE
The following example displays all configured IP subnet-based VLANs.
Console#show subnet-vlan
IP Address
Mask VLAN ID Priority
--------------- --------------- ------- --------
192.168.12.0 255.255.255.128 1 0
192.168.12.128 255.255.255.192 3 0
192.168.12.192 255.255.255.224 4 0
192.168.12.224 255.255.255.240 5 0
192.168.12.240 255.255.255.248 6 0
192.168.12.248 255.255.255.252 7 0
192.168.12.252 255.255.255.254 8 0
192.168.12.254 255.255.255.255 9 0
192.168.12.255 255.255.255.255 10 0
Console#