Black Box LGB6026A, Management Manual

Page: 1240 / 1289

– 1238 –
C
HAPTER
48 | Multicast Routing Commands
PIM Multicast Routing
Lan Prune Delay : Disabled
Propagation Delay : 500 ms
Override Interval : 2500 ms
Graft Retry Interval : 3 sec
Max Graft Retries : 3
State Refresh Ori Int : 60 sec
Console#
ipv6 pim graft-retry-
interval
This command configures the time to wait for a Graft acknowledgement
before resending a Graft. Use the
no form to restore the default value.
S
YNTAX
ipv6 pim graft-retry-interval seconds
no ipv6 pim graft-retry-interval
seconds - The time before resending a Graft.
(Range: 1-10 seconds)
D
EFAULT
S
ETTING
3 seconds
C
OMMAND
M
ODE
Interface Configuration (VLAN)
C
OMMAND
U
SAGE
A graft message is sent by a router to cancel a prune state. When a router
receives a graft message, it must respond with an graft acknowledgement
message. If this acknowledgement message is lost, the router that sent
the graft message will resend it a number of times (as defined by the
ipv6
pim max-graft-retries command).
E
XAMPLE
Console(config-if)#ipv6 pim graft-retry-interval 9
Console(config-if)#
ipv6 pim hello-
holdtime
This command configures the interval to wait for hello messages from a
neighboring PIM router before declaring it dead. Use the
no form to restore
the default value.
S
YNTAX
ipv6 pim hello-holdtime seconds
no ipv6 pim hello-interval
seconds - The hold time for PIM hello messages. (Range: 1-65535)