Black Box LGB6026A, Management Manual

Page: 616 / 1289

– 614 –
C
HAPTER
23 | Using the Command Line Interface
Entering Commands
◆
VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt will change to
“Console(config)#” which gives you access privilege to all Global
Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the
following commands. Use the
exit or end command to return to the
Privileged Exec mode.
Table 31: Configuration Command Modes
Mode Command Prompt Page
Access
Control List
access-list ip standard
access-list ip extended
access-list mac
Console(config-std-acl)
Console(config-ext-acl)
Console(config-mac-acl)
802
802
814
access-list ipv6 standard
access-list ipv6 extended
Console(config-std-ipv6-acl) 809
Console(config-ext-ipv6-acl) 810
Class Map class-map Console(config-cmap) 940
DHCP ip dhcp pool Console(config-dhcp) 1048
Line line {console | vty} Console(config-line) 643
Interface interface {ethernet port |
port-channel id | vlan id }
Console(config-if)
824
MSTP spanning-tree mst-configuration Console(config-mstp) 867
Policy Map policy-map Console(config-pmap) 943
Router router {pim | pim6 | rip | ospf} Console(config-router) 1214
1236
1118
1136
Time Range time-range Console(config-time-range) 667
VLAN vlan database Console(config-vlan) 891
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
.
.
Console(config-if)#exit
Console(config)#