Black Box LGB6026A, Management Manual

Page: 899 / 1289

– 897 –
C
HAPTER
38 | VLAN Commands
Configuring VLAN Interfaces
switchport native
vlan
This command configures the PVID (i.e., default VLAN ID) for a port. Use
the
no form to restore the default.
S
YNTAX
switchport native vlan vlan-id
no switchport native vlan
vlan-id - Default VLAN ID for a port. (Range: 1-4093, no leading
zeroes)
D
EFAULT
S
ETTING
VLAN 1
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)
C
OMMAND
U
SAGE
◆
If an interface is not a member of VLAN 1 and you assign its PVID to
this VLAN, the interface will automatically be added to VLAN 1 as an
untagged member. For all other VLANs, an interface must first be
configured as an untagged member before you can assign its PVID to
that group.
◆
If acceptable frame types is set to all or switchport mode is set to
hybrid , the PVID will be inserted into all untagged frames entering the
ingress port.
E
XAMPLE
The following example shows how to set the PVID for port 1 to VLAN 3:
Console(config)#interface ethernet 1/1
Console(config-if)#switchport native vlan 3
Console(config-if)#
vlan-trunking
This command allows unknown VLAN groups to pass through the specified
interface. Use the
no form to disable this feature.
S
YNTAX
[ no ] vlan-trunking
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)