Black Box LGB6026A, Management Manual

Page: 1087 / 1289

– 1085 –
C
HAPTER
46 | IP Interface Commands
IPv6 Interface
IP
V
6 I
NTERFACE
This switch supports the following IPv6 interface commands.
Table 149: IPv6 Configuration Commands
Command Function Mode
Interface Address Configuration and Utilities
ipv6 default-gateway Sets an IPv6 default gateway for traffic with no known GC
next hop
ipv6 address Configures an IPv6 global unicast address, and IC
enables IPv6 on an interface
ipv6 address eui-64 Configures an IPv6 global unicast address for an IC
interface using an EUI-64 interface ID in the low order
64 bits, and enables IPv6 on the interface
ipv6 address link-local Configures an IPv6 link-local address for an interface IC
and enables IPv6 on the interface
ipv6 enable Enables IPv6 on an interface that has not been IC
configured with an explicit IPv6 address
ipv6 mtu Sets the size of the maximum transmission unit (MTU) IC
for IPv6 packets sent on an interface
show ipv6 interface Displays the usability and configured settings for IPv6
interfaces
NE, PE
show ipv6 mtu Displays maximum transmission unit (MTU)
information for IPv6 interfaces
NE, PE
show ipv6 traffic Displays statistics about IPv6 traffic NE, PE
clear ipv6 traffic Resets IPv6 traffic counters PE
ping6 Sends IPv6 ICMP echo request packets to another PE
node on the network
Neighbor Discovery
ipv6 hop-limit Configures the maximum number of hops used in GC
router advertisements that are originated by this
router
ipv6 neighbor Configures a static entry in the IPv6 neighbor GC
discovery cache
ipv6 nd dad attempts Configures the number of consecutive neighbor IC
solicitation messages sent on an interface during
duplicate address detection
ipv6 nd ns-interval Configures the interval between IPv6 neighbor IC
solicitation retransmissions on an interface
ipv6 nd reachable-time Configures the amount of time that a remote IPv6 IC
node is considered reachable after some reachability
confirmation event has occurred
clear ipv6 neighbors Deletes all dynamic entries in the IPv6 neighbor PE
discovery cache
show ipv6 neighbors Displays information in the IPv6 neighbor discovery PE
cache