Black Box LGB6026A, Management Manual

Page: 851 / 1289

– 849 –
34
P
ORT
M
IRRORING
C
OMMANDS
Data can be mirrored from a local port on the same switch or from a
remote port on another switch for analysis at the target port using
software monitoring tools or a hardware probe. This switch supports the
following mirroring modes.
Table 92: Port Mirroring Commands
Command Function
Local Port Mirroring Mirrors data to another port for analysis without affecting the data
passing through or the performance of the monitored port
L
OCAL
P
ORT
M
IRRORING
C
OMMANDS
This section describes how to mirror traffic from a source port to a target
port.
Table 93: Mirror Port Commands
Command Function Mode
port monitor
show port monitor
Configures a mirror session
Shows the configuration for a mirror port
IC
PE
port monitor
This command configures a mirror session. Use the no form to clear a
mirror session.
S
YNTAX
port monitor { interface [ rx | tx | both ]}
no port monitor interface
interface - ethernet unit / port (source port)
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-26/50)
rx - Mirror received packets.
tx - Mirror transmitted packets.
both - Mirror both received and transmitted packets.
D
EFAULT
S
ETTING
◆
No mirror session is defined.