Black Box LGB6026A, Management Manual

Page: 445 / 1289

– 443 –
C
HAPTER
16 | Multicast Filtering
Multicast VLAN Registration
A
SSIGNING
S
TATIC
M
ULTICAST
G
ROUPS
TO
I
NTERFACES
Use the Multicast > MVR (Configure Static Group Member) page to
statically bind multicast groups to a port which will receive long-term
multicast streams associated with a stable set of hosts.
CLI R
EFERENCES
◆
"mvr vlan group" on page 988
P
ARAMETERS
These parameters are displayed in the web interface:
◆
Port – Port identifier.
◆
VLAN – VLAN identifier
◆
Group IP Address – Defines a multicast service sent to the selected
port. Multicast groups must be assigned from the MVR group range
configured on the Configure General page.
W
EB
I
NTERFACE
To assign a static MVR group to a port:
1.
Click Multicast, MVR.
2. Select Configure Static Group Member from the Step list.
3.
Select Add from the Action list.
4. Select a VLAN and port member to receive the multicast stream, and
then enter the multicast group address.
5. Click Apply.
Figure 262: Assigning Static MVR Groups to a Port
To show the static MVR groups assigned to a port:
1. Click Multicast, MVR.
2. Select Configure Static Group Member from the Step list.
3. Select Show from the Action list.