Black Box LGB6026A, Management Manual

Page: 1202 / 1289

C
HAPTER
47 | IP Routing Commands
Open Shortest Path First (OSPFv3)
– 1200 –
Table 172: show ip ospf interface - display description (Continued)
Field Description
Router ID Identifier for this router
Network Type Includes broadcast, non-broadcast, or point-to-point networks
Cost Interface transmit cost
Transmit Delay Interface transmit delay (in seconds)
State
◆
Backup – Backup Designated Router
◆
Down – OSPF is enabled on this interface, but interface is down
◆
DR – Designated Router
◆
DROther – Interface is on a multiaccess network, but is not the DR or
BDR
◆
Loopback – This is a loopback interface
◆
PointToPoint – A direct link between two routers.
◆
Waiting – Router is trying to find the DR and BDR
Priority Router priority
Designated
Router
Designated router ID and respective interface address
Backup
Designated
Router
Backup designated router ID and respective interface address
Timer intervals Configuration settings for timer intervals, including Hello, Dead and
Retransmit
Neighbor Count Count of network neighbors and adjacent neighbors
Hello Number of Hello LSAs received and sent
DD Number of Database Descriptor packets received and sent
LS-Req Number of LSA requests
LS-Upd Number of LSA updates
LS-Ack Number of LSA acknowledgements
Discarded Number of LSAs discarded
show ipv6 ospf
neighbor
This command displays information about neighboring routers on each
interface within an OSPF area.
S
YNTAX
show ipv6 ospf [ tag process-name ] neighbor
process-name - A process name used to distinguish between
multiple routing instances configured on the local router.
(Range: Alphanumeric string up to 16 characters)
C
OMMAND
M
ODE
Privileged Exec