Black Box LGB6026A, Management Manual

Page: 838 / 1289

C
HAPTER
32 | Interface Commands
– 836 –
Console#
Table 86: show interfaces switchport - display description
Field Description
Broadcast
Threshold
Shows if broadcast storm suppression is enabled or disabled; if enabled
it also shows the threshold level ( page 831 ).
LACP Status Shows if Link Aggregation Control Protocol has been enabled or disabled
( page 841 ).
Ingress/Egress
Rate Limit
Shows if rate limiting is enabled, and the current rate limit (
page 853 ).
VLAN Membership
Mode
Indicates membership mode as Trunk or Hybrid (
page 896 ).
Ingress Rule Shows if ingress filtering is enabled or disabled ( page 895 ).
Acceptable Frame
Type
Shows if acceptable VLAN frames include all types or tagged frames only
( page 893 ).
Native VLAN Indicates the default Port VLAN ID ( page 897 ).
Priority for
Untagged Traffic
Indicates the default priority for untagged frames (
page 929 ).
GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled
( page 888 ).
Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates
untagged and “(t)” indicates tagged ( page 894 ).
Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP
( page 888 ).
Private-VLAN
Mode
Shows the private VLAN mode as host, promiscuous, or none ( 908 ).
Private VLAN host-
association
Shows the secondary (or community) VLAN with which this port is
associated ( 909 ).
Private VLAN
mapping
Shows the primary VLAN mapping for a promiscuous port ( 910 ).
802.1Q-tunnel
Status
Shows if 802.1Q tunnel is enabled on this interface ( 901 ).
802.1Q-tunnel
Mode
Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q Tunnel
Uplink ( 901 ).
802.1Q-tunnel
TPID
Shows the Tag Protocol Identifier used for learning and switching packets
( 902 ).
show interfaces
transceiver
This command displays identifying information for the specified transceiver,
as well as the temperature, voltage, bias current, transmit power, and
receive power.
S
YNTAX
show interfaces transceiver [ interface ]
interface
ethernet unit / port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-26/50)