Black Box LGB6026A, Management Manual

Page: 844 / 1289

– 842 –
C
HAPTER
33 | Link Aggregation Commands
Mac Address : 12-34-12-34-12-3F
Configuration:
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full, 1000full
Flow Control : Disabled
Port Security : Disabled
Max MAC Count : 0
Current status:
Created By : LACP
Link Status : Up
Port Operation Status : Up
Operation speed-duplex : 100full
Flow control Type
: None
Member Ports : Eth1/10, Eth1/11, Eth1/12,
Console#
lacp admin-key
(Ethernet Interface)
This command configures a port's LACP administration key. Use the no
form to restore the default setting.
S
YNTAX
lacp { actor | partner } admin-key key
no lacp { actor | partner } admin-key actor - The
local side an aggregate link. partner - The
remote side of an aggregate link.
key - The port admin key must be set to the same value for ports
that belong to the same link aggregation group (LAG).
(Range: 0-65535)
D
EFAULT
S
ETTING
0
C
OMMAND
M
ODE
Interface Configuration (Ethernet)
C
OMMAND
U
SAGE
◆
Ports are only allowed to join the same LAG if (1) the LACP system
priority matches, (2) the LACP port admin key matches, and (3) the
LACP port channel key matches (if configured).
◆
If the port channel admin key ( lacp admin key - Port Channel) is not set
when a channel group is formed (i.e., it has the null value of 0), this
key is set to the same value as the port admin key (
lacp admin key -
Ethernet Interface) used by the interfaces that joined the group.
◆
Once the remote side of a link has been established, LACP operational
settings are already in use on that side. Configuring LACP settings for
the partner only applies to its administrative state, not its operational
state.