Black Box LGB6026A, Management Manual

Page: 336 / 1289

– 334 –
C
HAPTER
14 | Security Measures
Configuring 802.1X Port Authentication
◆
Intrusion Action – Sets the port’s response to a failed authentication.
■
Block Traffic – Blocks all non-EAP traffic on the port. (This is the
default setting.)
■
Guest VLAN – All traffic for the port is assigned to a guest VLAN.
The guest VLAN must be separately configured (See "Configuring
VLAN Groups" on page 164 ) and mapped on each port (See
"Configuring Network Access for Ports" on page 282 ).
Authenticator PAE State Machine
◆
State – Current state (including initialize, disconnected, connecting,
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
◆
Reauth Count – Number of times connecting state is re-entered.
◆
Current Identifier – Identifier sent in each EAP Success, Failure or
Request packet by the Authentication Server.
Backend State Machine
◆
State – Current state (including request, response, success, fail,
timeout, idle, initialize).
◆
Request Count – Number of EAP Request packets sent to the
Supplicant without receiving a response.
◆
Identifier (Server) – Identifier carried in the most recent EAP
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
◆
State – Current state (including initialize, reauthenticate).
W
EB
I
NTERFACE
To configure port authenticator settings for 802.1X:
1.
Click Security, Port Authentication.
2. Select Configure Interface from the Step list.
3. Click Authenticator.
4. Modify the authentication settings for each port as required.
5.
Click Apply