Biotek EL800, Operator'S Manual

Page: 137 / 218

Qualification Procedures
|
111
ELx800 Operator's Manual
Defining the Absorbance Test Plate Parameters
Using the Standards Certificate provided with the Absorbance Test Plate, follow
the steps below to define the Test Plate parameters.
To define the Test Plate parameters via the instrument keypad:
1. Start at the Main Menu and select
UTIL SELECT UTILITY
OPTION SETUP
. The
EDIT SETUP INFORMATION
menu will appear:
E D I T S E T U P I N F O R M A T I O N :
D A T E T I M E F I L T E R * M O R E
2.
Press
*MORE
to display the second
EDIT SETUP
menu. Select
CALPLATE
to
access the
CALIBRATION FILTER
menu.
3.
Using the Standards Certificate packaged with the Test Plate, select the
filter wavelength.
E D I T S E T U P I N F O R M A T I O N :
R S 2 3 2 C A L P L A T E * M O R E
C A L I B R A T I O N F I L T E R : 4 0 5
4 0 5 4 5 0 4 9 0 * M O R E
4. Press ENTER. The
WELL LOCATION/CALIBRATION VALUE
screen
appears:
W A V E L E N G T H : 4 0 5 W E L L : C 0 1
C A L I B R A T I O N V A L U E : 0 . 1 5 8
5. Enter the values listed on the Test Plate Standards Certificate. After each
entry, press
ENTER to advance to the next consecutive well location.
Repeat for the remaining filters.
6. When all values have been entered, press the Main Menu key.