manualshive.com logo in svg

Biotek EL800, Operator'S Manual

Share
Download
Biotek EL800 Operator'S Manual Download Page 110

84  

| 

Chapter 3: Operation

 

 

BioTek Instruments, Inc. 

To create a panel assay, start at the Main Menu, select 

DEFINE

, and then 

choose assay number 

99

. Enter the panel assay name. 

 

N 

A 

M 

E 

:  

 

 

 

 P A N E L           

  

 

  -              /           :         S P  A  C  E 

• 

The default name is 

“PANEL”

. 

• 

Use the 

alpha

 

and

 

numeric

 keys to update the assay name, if desired.  

• 

Press 

ENTER

 to continue. The 

NUMBER OF ASSAYS

 screen will appear. 

N  U  M  B  E  R      O F

  A S S A Y S :  

 

                2 

                                               

• 

Specify the number of assays to include in the panel (1 to 8). 

• 

Press 

ENTER

 to continue. The 

MAPPING DIRECTION

 selection screen 

will appear. 

M  A  P  P  I  N  G    D I R E C T I O N : D O W  N         

D O  W  N      A  C R O S S                        

• 

This option ensures that all assays will be mapped in the same 
direction. 

• 

Select 

DOWN

 or 

ACROSS

. 

After selecting the mapping direction of the assays, choose which assays to 
include in the panel. 

 

S  E  L  E  C  T      A S S A Y    N U M B E R :         2 2 

N A  M  E  :    H  B S - A G 1                      

• 

Press 

Options

 to cycle through the assay numbers and names, or use 

the 

numeric

 keys to enter an assay number. Press 

ENTER

 to make a 

selection. 

• 

After an assay is selected, its starting location must be defined. 

Summary of Contents for EL800



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands