BENSHAW RediStart MX2 SEP, User Manual

Page: 85 / 130

6 - Parameter Descriptions
85
FUN 10 / P52 Com Address (Drop #)
LCD / LED
Displays
FUN: Com Drop #
10 1
Range 1 – 247 (Default: 1)
Description The Communication Address parameter sets the controller’s address for Modbus communications.
See Also • Local Source (QST 04 / P37) parameter on Page 61.
• Remote Source (QST 05 / P38) parameter on Page 61.
FUN 11 / P51 Communication Baudrate
LCD / LED
Displays
FUN: Com Baudrate
11 19200
Range 1200, 2400, 4800, 9600, 19200 bps (Default: 19200)
Description The Communication Baud Rate parameter sets the baud rate for Modbus communications.
See Also • Local Source (QST 04 / P36) parameter on Page 61.
• Remote Source (QST 05 / P37) parameter on Page 61.
FUN 12 / P50 Communication Timeout
LCD / LED
Displays
FUN: Com Timeout
12
Off
Range Off, 1 – 120 (Default: Off)
Description The Communication Timeout parameter sets the time that the controller continues to run without receiving a
valid Modbus request. If a valid Modbus request is not received for the time that is set, the controller declares a
F82 (Modbus Timeout Fault). The controller performs a controlled stop.
See Also • Local Source (QST 04 / P37) parameter on Page 61.
• Remote Source (QST 05 / P38) parameter on Page 61.
•
Stop Mode (CFN 05 / P10) parameter on Page 64.
• Controlled Fault Stop Enable (PFN 15 / P33) parameter on Page 73.
•
Communication parameters (FUN 10–13 / P50–53) on Pages 85–86.
1
OFF
19 .2