BENSHAW RediStart MX2 SEP User Manual Download Page 10 | Manualshive

Page: 10 / 130

background image

RediStart MX

2

- SEP Synchronous Controller User Manual

10

Benshaw Services

General
Information

Benshaw offers its customers the following:

• Start-up services
• On-site training services
• Technical support
• Detailed documentation
• Replacement parts

NOTE

: Information about products and services is available by contacting Benshaw, refer to Page 11.

Start-Up
Services

Benshaw technical field support personnel are available to customers with the initial start-up of the MX

2

SEP

Controller. Information about start-up services and fees are available by contacting Benshaw.

On-Site Training
Services

Benshaw technical field support personnel are available to conduct on-site training on MX

2

SEP operations and

troubleshooting.

Technical
Support

Benshaw technical support personnel are available at no charge to answer customer questions, and provide
technical support over the telephone. For more information about contacting technical support personnel, refer
to Page 11.

Documentation

Benshaw provides all customers with:

• Operations manual.
• Wiring diagrams.

All drawings are produced in AutoCAD format. The drawings are available via e-mail by contacting Benshaw.

Replacement
Parts

Spare and replacement parts can be purchased from Benshaw Technical Support.

Software
Number

This manual pertains to software version number 810027-01-08.

Hardware
Number

This manual pertains to the hardware version number 300063-01.

Publication
History

See inside back cover.

Warranty

Benshaw provides a 1 year standard warranty with its controllers. An extension to the 3 year warranty is
provided when a Benshaw or Benshaw authorized service technician completes the installation and initial start
up. The warranty data sheet must also be signed and returned. The cost of this service is not included in the
price of the Benshaw controller and will be quoted specifically to each customers needs. All recommended
maintenance procedures must be followed throughout the warranty period to ensure validity.

«
...
8
9
10
11
12
...
»

Summary of Contents for RediStart MX2 SEP



































































































































Reviews:

No comments

Related manuals for RediStart MX2 SEP

Brand: XBOX Pages: 2

Brand: Echelon Pages: 40

Brand: IBM Pages: 144

Brand: Samsung Pages: 27

Brand: Galcon Pages: 32

Brand: UNITED Pages: 8

Brand: Dantherm Pages: 96

Brand: Calsense Pages: 74

VLT AutomationDrive FC 302

Brand: Danfoss Pages: 128

VLT DriveMotor FCP 106

Brand: Danfoss Pages: 4

Brand: Fagor Pages: 10

Brand: Fagor Pages: 358

Brand: Fagor Pages: 556

Brand: Fagor Pages: 172

Brand: Fagor Pages: 180

Brand: Fagor Pages: 112

Master Control Unit

Brand: FaderMate Pages: 36

Brand: Federal Signal Corporation Pages: 79

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands