BENSHAW RediStart MX2 SEP, User Manual

Page: 60 / 130

RediStart MX
2
- SEP Synchronous Controller User Manual
60
QST 00 Jump to Parameter
LCD Display
QST: Jump Code
00
1
Description By changing the value of this parameter and pressing [ENTER], you can jump directly to any parameter within
that group.
QST 01 / P1 Current Setpoint
LCD / LED
Displays
QST: Cur Setpoint
01 10
Amp
Range 1

1000 Amps DC (Default: 10)
Description The Current Setpoint sets the field current supplied to the motor.
QST 02 / P3 Field Apply Delay
LCD / LED
Displays
QST: F Apply Dly
02 Off
Range Off, 0.1 – 20.0 (Default: Off)
Description The following is when (FUN 09 / P39) is set to “Brush Type” :
The field apply delay timer will delay the application of the field after the motor has reached the slip speed (CFN
01 / P2).
The following is when (FUN 09 / P39) is set to “Brushless Control” :
The field apply delay timer will delay the application of the field when a start command is received. In most
cases, this should be set to a long enough time to allow the motor to reach it's operating speed before applying
the field.
NOTE: See Theory of Operation for complete descriptions of Control Modes on Page 89.
NOTE: Not used in Current Controller mode.
See Also • Controller Type (FUN 09 / P39) on Page 84.
•
Digital Inputs (I/O 01–03 / P40–42) on Page 75.
• Theory of Operation, Control Modes of Synchronous Motor Controls on Page 89.
10
OFF