BENSHAW RediStart MX2 SEP, User Manual

Page: 53 / 130

5 - Parameter Groups
53
5 -
Parameter Groups
5.1 Introduction
The MX
2
SEP incorporates a number of parameters that allow you to configure the controller to meet the
special requirements of your particular application. The parameters are organized two ways, depending on the
display being used:
• When the remote LCD display is used, the parameters are divided into groups of related functionality, and
within the groups the parameters are identified by a short, descriptive name. The parameters are subdivided
into six groups. The groups are
QST (Quick Start), CFN (Control Functions), PFN (Protection Functions), I/O
(Input/Output Functions), FUN (Function) and FL1 (Faults).
• When the standard, on-board LED display is used, the parameters are in a single group and numbered P1,
P2, P3… etc.
LCD parameters are divided into groups of related functionality, and within the groups the parameters are
identified by a short, descriptive name. They are numbered by the group name, followed by an index within the
group.
The Quick Start group provides a collection of parameters most commonly changed when commissioning a
controller. Many of the parameters in the Quick Start group are duplicates of parameters in other groups.
This section lists all of the parameters and possible values, and the tables provide a convenient place to record
the parameter settings for your system.