152
ESU-2400H Model Only
CONFigure Subsystem
This group allows the user to setup the display and operational settings for the unit.
Note that there are independent settings for the Measure RF Energy screen and the
Measure RF Leakage screen.
KEYWORD
PARAMETER FORM
COMMENTS
CONFigure
:RFMeasure
:DISPlay
:SxZy
nn
S = display_screen_number
Z = zone_number
display_screen_number = 1-6
nn = Parameter for selected Zone
1 = One Parameter
0=V Load
14=mA P1
2 = Two Parameters
1=mA
15=Watts P1
3 = Three Parameters
2=Watts
16=V Load P2
4 = Four Parameters
3=V Peak
17=mA P2
5 = Five Parameters
4=V Pk-Pk
18=Watts P2
6 = Display All Parameters
5=V Pk /mV Pk-Pk
19=V Peak P2
6=V Pk+
20=Time On P2
7=Crest Factor
21=% Duty Cycle P2
8=kHz
22=V Load P3
9=Time On P1
23=mA P3
10=Time Off P1
24=Watts P3
11=Time-Total Cycle
25=V Peak P3
12=% Duty Cycle P1
26=Time On P3
13=V Load P1
27=% Duty Cycle P3
:SCReen < numeric_value >
:AVERaging FAST | SLOW | MEDium
:LOAD
:MODE
INTernal | EXTernal | INT/EXTernal
:INTernal <numeric_value>
0-6400
:EXTernal <numeric_value>
0-6400
:ACTual?
Read Only, returns calibrated
load value, what the 2400 uses
for Watts calculations
:INPut
:RANGe 100 | 1000 | AUTo
:MODE
CONTinuous | PULsed, DELayed
:TYPE
ISOlated | GND
Range 1-6
1-5 = # display zones
6=Measurement List Display
Summary of Contents for ESU-2400
