BC Biomedical ESU-2400, User Manual

Page: 69 / 190

57
The autosequence is a programmable procedure for performing testing on a generator.
The autosequence can consist of any combination of user instructions, RF
measurements, Load Curves, or CQM tests. Once an autosequence is created, it can be
saved as a secure sequence, which cannot be modified. The following image shows the
main autosequence menu, where the user can load an autosequence, begin a ForceTriad
PM, view previously saved test results, or create new autosequence.
When selecting an autosequence, the user has the option of opening an Autosequence
Setup file (*.seq) or a Secure Autosequence (*.ssq) by selecting the filter type in the File
Open dialog box (see page 126). The Secure Sequence cannot be modified by the user.
AUTOSEQUENCES