BC Biomedical ESU-2400, User Manual, Page: 166 / 190

154
:PULsed MODE 1 | 2 | 3
PULSET1
< numeric_value > 0-10000mA
PULSET2
< numeric_value > 0-10000mA
TIMEOUT
< numeric_value >
0-1000 us
:DELayed PULSET1
< numeric_value > 0-10000mA
DELay < numeric_value > 0-10000 ms
:FOOTswitch
OUTput ON, OFF
DURation 5 | 10 | 15 Number of seconds footswitch is
triggered
SELect 1-5
CONFigure
:CQM
:LOAD OPEN or <numeric_value> Open circuit or 0-500 (ohms)
:COHMs <numeric_value> Range 0-500, sets the amount
to change the CQM
resistance when the ohms
UP/Down buttons are used
:UP Same as pressing Change by
Ohms Up button
:DOWN Same as pressing Change by
Ohms Down button
:POHMs <numeric_value> Range 0-500, sets the amount
to change the CQM
resistance when the percent
UP/Down buttons are used
:UP Same as pressing Change by
Percent Up button
:DOWN Same as pressing Change by
Percent Down button
:HOLD ON | OFF
:MODE MAIN | RFMeasure | RFLeakage | CQM | LCURve | ASEQuence | SYStools
SYSTem Subsystem
This group allows the user to setup the startup mode for the unit, as well as directly
control the unit, as if pressing the keys on the front panel.
KEYWORD PARAMETER FORM COMMENTS
SYSTem
:VERsion? Read Only
:VOLume Range 0
– 10
:AVERaging :FAST <numeric_value> Range 1-200 (samples)
:MEDium <numeric_value> Range 1-200 (samples)
:SLOW <numeric_value> Range 1-200 (samples)
:WINdow <numeric_value> Range 0.0 to 100.0 (mV)