BC Biomedical ESU-2400, User Manual, Page: 162 / 190

150
ESU-2400 Communication Command Summary (Continued)
Keywords Nodes
Subnodes
Values
CONFigure CQM LOAD
OPEN or 0-500 (ohms)
Set or read CQM
resistance
COHMs
0-500 (ohms)
Set or read Change by
ohms amount
UP
Same as pressing change
by ohms UP button
DOWN
Same as pressing change
by ohms DOWN button
POHMs
0-500 (percent)
Set or read Change by
Percent amount
UP
Same as pressing change
by Percent UP button
DOWN
Same as pressing change
by Percent DOWN button
MODE
MAIN, RFMeasure, RFLeakage,CQM,Lcurve,ASEQuence, SYStools
HOLD
ON,OFF (only for RFMeasure, RFLeakage modes)
SYSTem
VERsion? [read only]
VOLume 0-10
AVERaging
FAST 1-200 (samples)
MEDium 1-200 (samples)
SLOW 1-200 (samples)
WINdow 0.0 - 100.0 (mV)
READ
MVrms? Returns: mV RMS [read only]
MArms? Returns: mA RMS [read only]
WArms? Returns: Watts RMS [read only]
MVPeak? Returns: mV Peak [read only]
MVPP? Returns: mV Peak to Peak [read only]
MVP-PP? Returns: mV Peak/Peak to Peak [read only]
MVPK+? Returns: mV Positive Peak [read only]
CF? Returns: Crest Factor [read only]
KHZ? Returns: Frequency [read only]
TON? Returns: Time - Pulse On [read only]
TOFF? Returns: Time - Pulse Off [read only]
TCYC? Returns: Time - Total Cycle [read only]
DCYC? Returns: % Duty Cycle [read only]
MVCyc? Returns: mV Total Cycle [read only]
MACyc? Returns: mA Total Cycle [read only]
WCyc? Returns: Watts Total Cycle [read only]
ALL? Returns: All readings in comma delimited format
DATA?
Returns: Entire Data Buffer [read only] Length = NUMSamples * 2
Data Format is mV in signed double byte format, Decimal place is assumed based
on Input Range (Low Range = 2DP, High Range = 1DP)
TEMP? Returns system temperature (Highest temperature of 8 sensors)
SVOLtage?
Returns List of system supply voltages
Footswitch Fuse, +12V, Vbacklight, +5V, +3D, +3ETX, +3DISP, VPS2, Front USB,
Side USB Bottom, Side USB Top