baxter Colleague 3 CXE, Operator'S Manual

Page: 83 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
4-29
Operating Instructions
Primary Infusions
10.
Press the
START
key to begin the infusion. COLLEAGUE
GUARDIAN infusions are indicated by the mortar and pestle icon
next to the label on the Main Display screen (Figure 4-37)
If a secondary infusion has been programmed but not started, a
pop-up appears (Figure 4-26) warning that a primary infusion is
about to start when a secondary infusion has been programmed. See
step 7 on page 4-22 for more information.
Programming a Primary COLLEAGUE GUARDIAN Infusion (Non-Weight-Based)
1.
From the Main Display, access the Programming screen:
2.
From the Programming screen, press the
Colleague Guardian
soft
key.
The labels for which COLLEAGUE GUARDIAN limits have been
configured are displayed in a pop-up window (Figure 4-38). A
yellow triangle beside the label indicates that the standard
concentration can be edited if clinically necessary.
3.
Use the
×Ø
keys (and
Page Up/Page Down
soft keys if necessary)
to highlight the desired label, then press the
Select
soft key.
Figure 4-37 Infusion with
COLLEAGUE GUARDIAN Limit
Override
Note:
Overriding
COLLEAGUE
GUARDIAN
Limits
If the clinical decision was to override the
COLLEAGUE GUARDIAN limits, the rate is displayed
in red on a yellow highlight indicating that the
programmed dose is outside of the COLLEAGUE
GUARDIAN limits.
For single channel pumps: For triple channel pumps:
press the
Primary
soft key or
the
Rate
or
Volume
keys.
press the desired
Channel
Select
key.
Figure 4-38 COLLEAGUE
GUARDIAN Label List