baxter Colleague 3 CXE, Operator'S Manual

Page: 61 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
4-7
Operating Instructions
Powering On Using Battery Power
Low Battery Condition
If the pump is powered up on battery power and a Low Battery condition
exists, a Plug In Now alert pop-up is displayed (Figure 4-9) prior to the
speaker test, alerting the user that there is less than 30 minutes of battery
time remaining. Using battery mode is NOT recommended when this
alert occurs.
„
To continue on battery power, press the
Ok
soft key. See
“Operating on Battery Power,” 4-8 for more information.
„
To continue on AC power, plug the pump into an AC outlet.
The Main Display then prompts the user to perform the speaker test.
Proceed to step 2 on page 4-3.
Depleted Battery Condition
If the pump is powered up on battery power and a Depleted Battery
condition exists, a Plug In Now alarm pop-up is displayed prior to the
speaker test, alerting the user that battery damage will occur if the pump
is not plugged in, and the pump will shut down in less than 10 seconds
(Figure 4-10).
To continue on AC power, plug the pump into an AC outlet. A pop-up is
displayed alerting the user that the pump is charging and must be
allowed to sufficiently recharge the battery before operating on battery
power. Press the
Ok
soft key. The Main Display then prompts the user to
perform the speaker test. Proceed to step 2 on page 4-3.
Figure 4-9 Plug in Now Alert
Pop-up, Low Battery Condition
Figure 4-10 Plug in Now Alarm
Pop-up, Depleted Battery Condition