baxter Colleague 3 CXE, Operator'S Manual

Page: 160 / 230

8
Troubleshooting Alarms
8-8
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
About the Damaged Battery Alarm
The
Damaged Battery! Service Now
alarm occurs if the pump
software detects that one or more of the conditions listed below is true
during power up.
„
The battery's history data was cleared inadvertently because of an
external event.
„
The battery voltage falls below 10.4 volts.
„
The battery has been charged and discharged more than 200
times.
If this alarm occurs at power on, a pop-up appears warning that the
pump may stop unexpectedly (Figure 8-8). Press the
Ok
soft key to
clear the pop-up. The pump cannot be used. The alarm can only be
cleared by replacing the batteries.
Turn the pump off, plug it in, and have it serviced as soon as possible so
its batteries can be replaced. Use a different pump to deliver the
infusion.
The pop-up shown in Figure 8-8 will also appear if the pump detects that
the battery is damaged when powered on but not in use. If the pump
detects that the battery is damaged during an infusion, the
Damaged
Battery! Service Now
alert will occur, and the pump will continue
infusing.
Plug the pump in immediately. Do not attempt to use the pump on
battery power or to transport the patient. Transfer the patient’s infusions
to another pump and have the damaged battery replaced by authorized
service personnel as soon as possible.
Note:
During power
on
If a
Damaged Battery! Service Now
alarm occurs dur-
ing power on, the pump cannot be used.
Figure 8-8 Power On Screen with
Damaged Battery Alarm Pop-up