baxter Colleague 3 CXE, Operator'S Manual

Page: 104 / 230

4
Standby Mode
4-50
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
7.
Press the
Confirm Secondary
soft key.
8.
If the primary set has a regulating clamp above the pump, close the
regulating clamp. Open the On/Off clamp on the secondary
medication/solution set and press the
START
key.
If a primary infusion has been programmed but not confirmed, an
Unconfirmed Primary Program
alarm occurs and a message is
displayed on the prompt line. See step 7 on page 4-47 for more
information.
Enabling the Secondary Callback Alert Option
This optional feature notifies the clinician that the secondary infusion
has been completed. When configured, an alert message can be
displayed with an audible alert tone when the secondary infusion
completes. On the secondary programming screen, the clinician uses the
Ø
key to highlight the Callback field, then selects
Yes
or
No
for using
the callback option by pressing the
Yes/No
soft key (Figure 4-72). To
cancel this alert, press the
Alarm Silence
key or any of the
programming keys.
If Callback is not displayed on the secondary programming screen, this
feature has not been enabled.
Standby Mode
The Standby mode allows the user to preprogram a pump channel for
future use without starting the infusion, or to leave the pump powered on
without having a
Channel Stopped
alert occur. Standby is available
for primary and secondary infusion programs. The
Open
key is disabled
when the pump is on Standby; therefore, an administration set cannot be
loaded or unloaded while the pump is on Standby.
Note:
Unconfirmed
Secondary
Program
If the START key is pressed before pressing the
Confirm Secondary soft key, an
Unconfirmed
Secondary Program
alarm occurs and a message is
displayed on the prompt line.
Figure 4-72 Select Callback
Yes or No