baxter Colleague 3 CXE, Operator'S Manual

Page: 90 / 230

4
Primary Infusions
4-36
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
12.
Press the
START
key to begin the infusion.COLLEAGUE
GUARDIAN infusions are indicated by a mortar and pestle icon next
to the channel on the Main Display screen
A yellow triangle is displayed beside the label name if the drug
amount, diluent, or concentration was changed to deviate from the
standard COLLEAGUE GUARDIAN settings.
If a secondary infusion has been programmed but not started, a
pop-up appears (Figure 4-26) warning that a primary infusion is
about to start when a secondary infusion has been programmed. See
step 7 on page 4-22 for more information.
Programming a Primary Dose Mode Infusion (Non-Weight Based)
1.
From the Main Display, access the Programming screen:
2.
From the Programming screen, press the
Change Mode
soft key.
The Programming Modes menu is displayed (Figure 4-51).
3.
Use the
×Ø
and/or
Page Up, Page Down
soft keys to highlight the
appropriate dose formula selection, if configured. Some or all of the
following dose modes may be available depending on pump
configuration at the facility:
•
Colleague Guardian
•
mg/hr
•
mg/min
•
mcg/hr
•
units/hr
•
mcg/min
•
mEq/hr
Figure 4-50 Main Display with
Non-Standard Concentration
Note:
Overriding
COLLEAGUE
GUARDIAN
Limits
If the clinical decision was to override the
COLLEAGUE GUARDIAN limits, the dose and
programming mode are displayed in red on a yellow
highlight, indicating that the programmed dose is
outside of the COLLEAGUE GUARDIAN limits.
For single channel pumps: For triple channel pumps:
press the
Primary
soft key or
the
Rate
or
Volume
keys.
press the desired
Channel
Select
key.
Figure 4-51 Programming Modes