baxter Colleague 3 CXE, Operator'S Manual

Page: 203 / 230

071960491 COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL
11-7
Quick Reference Guide
Selecting a Label
Selecting a Label
1.
For single channel pumps: press the
Primary
soft key.
For triple channel pumps: press the desired
Channel Select
key.
2.
Press the
Change Mode
soft key. The Programming Modes Menu is
displayed.
3.
Highlight
Label Line
(under
Functions
) using the
×Ø
keys, then
press the
Select
soft key.
A list of labels and their abbreviations is displayed (Figure 11-4).
4.
Use the
×Ø
keys and/or the
Page Up
and
Page Down
soft keys to
highlight the appropriate label, then press the
Select
soft key. When
the
Select
soft key is pressed, the Programming screen is displayed,
showing the selected label.
Note: Labels configured using the COLLEAGUE GUARDIAN feature do
not appear in the label list.
To clear a label, use the same procedure, but select No Label
from the label list. No Label always appears first in the label list.
Confirm that the selected label is appropriate for the medication/
solution infusing on that channel.
To add or change a label after the infusion is already running, first
stop the infusion by pressing the
STOP key. After following the
steps above, press START to resume the infusion.
Figure 11-4 Label List