manualshive.com logo in svg

baxter Colleague 3 CXE, Operator'S Manual

The Operator's Manual for the innovative Baxter Colleague 3 CXE can be easily accessed and downloaded for free from manualshive.com. This comprehensive manual provides detailed instructions and essential information, ensuring users maximize the potential of their Baxter Colleague 3 CXE. Experience seamless downloading and step-by-step guidance with our user-friendly manual.

Share
Download
background image

071960491

COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL

7-5

Maintenance and Storage

Maintenance

Optimizing Battery Service Life

Ensuring the following procedures are a part of routine device use can 
optimize battery service life:

„

Connect pumps to AC power at all times except in the event of 
AC power loss or short-term portable operation.

„

Store pumps plugged into AC power to maintain the battery 
charge whenever possible.

„

If the batteries have been discharged, do not store the pump 
without first fully charging the batteries. The batteries may be 
permanently damaged if the pump is stored unplugged with 
discharged batteries for more than two weeks.

„

To help prolong battery life, never store the pump unplugged. See 
“Storage,” 7-6 for more information.

„

Notify Central Supply or other appropriate departments as soon 
as a pump is removed from patient use so that it can be cleaned 
and the batteries can be recharged.

„

Recharge a pump that is in the 

DEPLETED Battery - Plug In 

Now 

alert condition or the 

NO Battery - Plug In Now

 alarm 

condition for a minimum of 12 uninterrupted hours or until the 
battery operating time displayed under the battery charge icon in 
the upper left part of the screen is 3h 15m (for triple channel 
pumps) or 4h 00m (for single channel pumps). A complete charge 
may take longer than 12 hours.

Charging the Batteries

When a 

NO BATTERY - Plug in Now

 alarm occurs plug the pump in 

immediately. Do not use the pump on battery power until the batteries 
have been fully recharged. Charge the batteries for at least 
12 uninterrupted hours or until the battery operating time displayed 
under the battery charge icon in the upper left part of the screen is 
3h 15m (for triple channel pumps) or 4h 00m (for single channel 
pumps). A complete charge may take longer than 12 hours.

The batteries are charging whenever the pump is plugged into a 
100-120 VAC, 50/60 Hz or 220-240 VAC 50/60 Hz outlet, regardless of 
whether the pump is on or off. Whenever the batteries are charging, the 
Plug icon is lit. Store the pump plugged in to maintain batteries at full 
charge. See “Storage,” 7-6 and the 

COLLEAGUE Pump Global Service 

Manual

 for more battery information.

CAUTION

 

When charging the batteries, ensure the room temperature is between 15° C 
(59° F) to 30° C (86° F) to minimize charge time and maximize battery life.

Summary of Contents for Colleague 3 CXE







































































































































































































































Reviews:

No comments

Related manuals for Colleague 3 CXE

Calpeda GEO Operating Instructions Manual preview
GEO
Brand: Calpeda Pages: 44
Calpeda CA Series Operating Instructions Manual preview
CA Series
Brand: Calpeda Pages: 64
Calpeda I Operating Instructions Manual preview
I
Brand: Calpeda Pages: 32
Danfoss APP 0.6 Instruction Manual preview
APP 0.6
Brand: Danfoss Pages: 8
Danner 20370 Quick Start Manual preview
20370
Brand: Danner Pages: 2
EAS Electric ETH220VMA Instruction Manual preview
ETH220VMA
Brand: EAS Electric Pages: 165
Samoa PM45 Service Manual preview
PM45
Brand: Samoa Pages: 40
Balcrank CF10 Operation And Maintenance Manual preview
CF10
Brand: Balcrank Pages: 18
Bryant 030-060 Installation And Service Instructions Manual preview
030-060
Brand: Bryant Pages: 26
Pentair PSC-119-35-02 Installation And Operation Manual preview
PSC-119-35-02
Brand: Pentair Pages: 36
SMC Networks PA3313 Series Operation Manual preview
PA3313 Series
Brand: SMC Networks Pages: 19
York AHV18B Technical Manual preview
AHV18B
Brand: York Pages: 14
SPERONI AGC 1100/25 Operating Instructions Manual preview
AGC 1100/25
Brand: SPERONI Pages: 68
Flux F 550 Original Main Operating Instructions preview
F 550
Brand: Flux Pages: 80
QED WELL WIZARD Installation Manual preview
WELL WIZARD
Brand: QED Pages: 33
Daikin ETSH16P50EF Operation Manual preview
ETSH16P50EF
Brand: Daikin Pages: 24
Pacific hydrostar Pacific Hydrostar 2" or 3" Dirty Water Pump... Instructions Manual preview
Pacific Hydrostar 2" or 3" Dirty Water Pump...
Brand: Pacific hydrostar Pages: 36
O-SO Pure Mineral Mizer Installation, Operation & Service Manual preview
Mineral Mizer
Brand: O-SO Pure Pages: 16

Brands by name

Popular brands

Load more brands