baxter Colleague 3 CXE, Operator'S Manual

Page: 212 / 230

11
Standby Mode
11-16
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
4.
Use the
×Ø
keys to highlight
Standby
, then press the
Select
soft
key. The Standby pop-up is displayed (Figure 11-16).
5.
Press the
×
key next to the
YES
shown on the pop-up to place the
pump into Standby mode.
For triple channel pumps:
1.
Ensure the pump channel is stopped. Press the
Channel Select
key
for the channel to be put on Standby.
2.
(Optional) To preprogram the channel for future use, program the
infusion (but do not press the
START
key).
3.
Press the
Channel Select
key again. The Standby pop-up is
displayed.
4.
Press the
×
key next to the
YES
shown on the pop-up to place the
channel into Standby mode.
To exit Standby:
1.
For single channel pumps: press the
Primary
soft key.
For triple channel pumps: press the desired
Channel Select
key.
The pump channel exits Standby and reverts to the programming
mode in effect when it was placed on Standby.
Figure 11-16 Standby Pop-up