baxter Colleague 3 CXE, Operator'S Manual

Page: 124 / 230

4
Unloading the Administration Set
4-70
COLLEAGUE CXE VOLUMETRIC INFUSION PUMP OPERATOR’S MANUAL 071960491
Unloading the Administration Set
Automatic Unloading
Note: The pump must be powered on to unload the administration set.
See “Powering On Using AC Power,” 4-1.
1.
If the pump module is running, press the
STOP
key on the pump
module to stop it.
2.
Close the regulating clamp on the administration set.
3.
Press the
Open
key on the pump module. The mechanism closes the
keyed slide clamp and opens the tubing channel. When an arrow is
displayed on the pump module, the tubing channel is open.
4.
When the arrow is displayed on the pump module display, grasp the
administration set on both sides of the pump and remove it from the
tubing channel. The mechanism closes automatically 60 seconds
after the administration set has been removed.
The administration sets should be disposed of in an appropriate manner,
considering the nature of the residual fluid that may be contained within,
in accordance with the facility disposal practices.
! WARNING !
While the pump automatically closes the keyed slide clamp, always close the
regulating clamp on the administration set before loading or removing the
administration set from the pump.
CAUTION
When attempting to load or unload an administration set, do not insert tools or
other objects into the tubing channel.
Note:
Loading
Mechanism
Disabled
If the loading mechanism is disabled (for example, the
battery has depleted), see “Using the Manual Tube
Release,” 4-71, for instructions on unloading the
administration set manually.
Note: Do not cut the tubing to remove the administration set
from the channel. If the tubing is cut, remove the slide
clamp immediately.