Barco ScreenPRO-II, User Manual

Page: 146 / 292

146 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Effects Menu
bÑÑÉÅíë=jÉåì
The figure below illustrates a sample Effects Menu :
Figure 4-48. Effects Menu (sample)
To access the menu:
•
Press EFFECTS on the Home Menu .
The Effects Menu allows you to modify and manage effects on a destination-by-
destination basis, including the ability to define key frames, paths and effect properties.
The following functions are provided:
•
Destination — displays the currently selected destination.
•
Key Frame Effect — enables you to select the type of motion for a “move.”
•
Transition Rate — sets the auto-transition rate that is used when the Auto Trans
button is pressed. The transition value is in 0.1 second increments.
•
Transition Wipe — sets the transition type when the WIPE button is selected.
Choose between Wipe Right , Wipe Left , Wipe Down , Wipe Up , Curtain Open ,
Curtain Close , Box In and Box Out .
•
Transition Edge Width — When WIPE is selected, this field enables you to set
the transition’s edge type. The range (in pixels) is from 0 to 256 .
In Chapter 6, refer to the “ Working with Transitions ” section on page 241 for instructions.
H
O
M
E
N
A
V
A
D
J
EFFECTS MENU
Key Frame Effect LINEAR
Transition Rate 1.0
Transition Wipe Wipe Right
! Wide Screen destinations
only support Mix Transition
! Keyframe Effects are ignored
by ScreenPROII destinations
Transition Edge Width 16
Destination 1
Note Only the Linear motion type is supported. All other key frame
effects are ignored by ScreenPRO-II destinations.
Note Wide screen destinations only support Mix transitions. Key
frame effects are ignored by ScreenPRO-II destinations.