Barco ScreenPRO-II, User Manual

Page: 222 / 292

222 ScreenPRO-II Controller • User’s Guide
6. Operations
Working with Destinations
tçêâáåÖ=ïáíÜ=aÉëíáå~íáçåë
Destinations can be configured as single screens, multiple screens (in wide screen
applications), auxiliary router outputs, ImagePRO Aux destinations and PresentationPRO-II
Aux destinations.
•
When single and wide screen ( Projector ) destinations are activated, Program
output is routed to the selected projectors.
•
When Aux destinations are activated, selected inputs (sources) can be routed to
the selected router outputs, or to external devices (such as ImagePRO and
PresentationPRO-II).
For destination setup instructions, refer to the following sections in Chapter 5:
•
“ Standard Destination Setup ," page 192.
•
“ Router Setup ," page 193.
•
“ AUX Destination Setup ," page 195.
The following topics are discussed in this section:
•
Activating Destinations
•
Clearing Destinations
•
Routing Sources to Destinations
^Åíáî~íáåÖ=aÉëíáå~íáçåë
„
Use the following steps to activate and deactivate destinations:
1. To activate a single Standard Destination , turn DEST AUX off, then press the
desired button on the Destination Bus . All other destinations will turn off.
2. To activate multiple Standard Destinations , turn DEST AUX off, then
simultaneously press the desired buttons on the Destination Bus . Any other
active destinations will turn off.
3. To activate a single Aux Destination , turn DEST AUX on, then press the desired
button on the Destination Bus . All other Aux destinations will turn off.
4. To activate multiple Aux Destinations , turn DEST AUX off, then simultaneously
press the desired buttons on the Destination Bus . Any other active Aux
destinations will turn off.
In each case, please note:
•
Remember that destination buttons are not toggles.
•
The selected buttons light when activated. Any combination of active destination
buttons can be selected.
•
When you press a single button or a group of buttons, your selection is mutually
exclusive with all other active destinations.
•
Press the All button to turn all destinations on.
1
DEST
AUX
All