Barco ScreenPRO-II, User Manual

Page: 127 / 292

ScreenPRO-II Controller • User’s Guide 127
4. Menu Orientation
System Menu
oçìíÉê=péÉÅáÑáÅ~íáçå=jÉåì
From the System Menu , press
{
ROUTER SETUP
}
to display the Router Specification
Menu .
Figure 4-30. Router Specification Menu (sample)
The Router Specification Menu enables you to define input, output and communication
parameters for all connected routers.
The following functions are provided:
•
Number — select the number of the router that you wish to configure. The
system supports up to eight definitions.
•
Name — this non-selectable field shows the router’s assigned name. After a
factory reset, router number 1 defaults to
[
MATRIXPRO1] in Analog format, router
number 2 defaults to [MATRIXPRO2] in SDI format, and router number 3 defaults
to [MATRIXPRO3] in DVI format.
•
Manufacturer — identifies the router manufacturer. Choose between FOLSOM ,
EXTRON , SIERRA , LEITCH , ISIS , DVILINK and DPI . Refer to the “ Router
Interface Notes ” section on page 128 for additional details about third party
manufacturers.
•
Router Type — identifies the type of router being used. The choices are
ANALOG , DVI , SDI , D/A ANALOG , D/A DVI and D/A SDI . Please note:
~
The { COMM SETUP
}
function must be set for Analog, DVI and SDI
routers.
~
The D/A selections are provided for future implementation.
•
Number of Inputs — identifies the number of inputs on the selected router.
•
Number of Outputs — identifies the number of outputs on the selected router.
Number of Inputs
Number of Outputs
Manufacturer FOLSOM
16
B
A
C
K
N
A
V
A
D
J
ROUTER SPECIFICATION
Number 1
8
Communication Type ETHERNET
Router Type ANALOG
COMM
SETUP
OUTPUT
PATCH
ADD
NEW
DELETE
ROUTER
[ MATRIXPRO1 ] Name
Note When a router number is undefined, the name [ROUTER #]
appears, and in the Number field, the word “ EMPTY ”
appears before the selected number.