Barco ScreenPRO-II, User Manual

Page: 245 / 292

ScreenPRO-II Controller • User’s Guide 245
6. Operations
Working with Presets
~
If a Preset is undefined, it will be skipped when Next is pressed.
„
Use the following steps to utilize the Previous function:
1. Information to be provided.
mêÉëÉí=kçíÉë
Please note the following important points regarding Presets:
•
Active destinations (both standard and Aux) are stored as part of a Preset.
•
Aux source selections are saved and recalled in Presets.
•
If different Presets have different Move definitions stored for the same Layer,
when you recall a Preset to a Layer that already has a PIP on Program, the
starting location of the recalled Move is ignored. Instead, the PIP’s "current"
location will be used as the move’s starting point, and the ending point from the
recalled Preset will be used. In this manner, you can effectively recall a series of
"end" points — all of which use the end point from the previous Preset as their
new starting point.
If you recall a Preset with a defined Move to an empty layer, both the starting and
ending points of the recalled Move will be used.
Note The Previous feature is currently not implemented.
Previous