Barco ScreenPRO-II, User Manual

Page: 125 / 292

ScreenPRO-II Controller • User’s Guide 125
4. Menu Orientation
System Menu
fåéìí=pçìêÅÉ=m~íÅÜ=jÉåì
From the System Menu , press
{
INPUT PATCH
}
to display the Input Source Patch Menu .
Figure 4-29. Input Source Patch Menu (sample)
The Input Source Patch Menu enables you to associate (patch) specific router inputs to
specific source buttons on the ScreenPRO-II Controller. The menu also enables you to
assign tallies, and select connections to the ScreenPRO-II units.
The following functions are provided:
•
Source Number — selects the source button on the Controller that you want to
patch. The selection range is 1 - 16 . The source is chosen with the ADJ knob —
not with the source buttons.
•
Connection Type — determines how the selected source is connected:
~
From a router — choose between up to eight MATRIXPRO routers, or a
third party router (e.g., SIERRA , LEITCH , etc.) as selected on the
Router Specification Menu .
~
To ScreenPRO-II’s internal matrix — choose ALL SP or an individual
ScreenPRO-II ID . The “ ALL SP ” selection assumes connections from
B
A
C
K
N
A
V
A
D
J
INPUT SOURCE PATCH
Source Number 1
DELETE
PATCH
MATRIXPRO1 Connection Type
1 Router Input
1 Tally Number
ADD
PATCH
Press “ADD PATCH” to log change
Important The fields that are shown on the Input Source Patch Menu
change depending upon the selected Connection Type .
Important From a conceptual standpoint, there are no “direct”
connections to a ScreenPRO-II scaler. All connections,
whether they are from a single source or an external router,
connect to each ScreenPRO-II’s internal router matrix.