Barco ScreenPRO-II, User Manual

Page: 158 / 292

158 ScreenPRO-II Controller • User’s Guide
4. Menu Orientation
Key Menu
•
Green Threshold — adjusts the key’s clip along the Magenta vector.
•
Blue Threshold — adjusts the key’s clip along the Yellow vector
•
Red Mask — adjusts the background mask to/from black along the Cyan vector.
•
Green Mask — adjusts background mask to/from black along the Magenta vector.
•
Blue Mask — adjusts background mask to/from black along the Yellow vector.
•
Opacity — adjusts the opacity of the keyed image, from fully opaque to fully
transparent. Adjustment range is 0 to 1024.
•
Press
{
STATS
}
to display the Status Menu . Refer to the “ Status Menu ” section
on page 147 for details.
•
Press
{
EFX
}
to display the Image Effects Menu . Refer to the “ Image Effects
Menu ” section on page 153 for details.
•
Press
{
PICK COLOR
}
to choose the keying color visually. Once pressed, the
{ GRAB COLOR } label appears, and a crosshair appears on Preview. Use the
Joystick to move the crosshair around the Preview monitor as desired.
•
Press { GRAB COLOR } to select the color directly underneath the crosshair.
These values are immediately mapped into the Red , Green and Blue color fields
on the menu, and can be adjusted with the knobs in the normal manner.
•
Press
{
SIZE & POS
}
to display the Key Adjustment Menu . Refer to the “ Key
Adjustment Menu ” section on page 160 for details.
`ìí=H=cáää=hÉó=cìåÅíáçåë
A Cut + Fill key is one in which the hole-cutting information is provided by a Key on Layer
B , while the fill information is provided by the effect on Layer A (either a PIP or a Key).
Cut + Fill functions are identical to those available when a Luma Key is selected. Refer to
the “ Luma Key Functions ” section on page 157 for details.
In Chapter 6, refer to the “ Working with Layers ” section on page 226 for instructions on
using all types of keys.
hÉó=pìÄ=jÉåìë
The following sub menus can be accessed from the Key Adjustment Menu :
•
Matte Menu
•
Key Adjustment Menu
Note Cut + Fill keys can only be selected on Layer B when the
Split Mode is enabled.