Page 43
Special Procedure
SP6: System Confi guration
SP6:
System
Confi guration
SPECTRUM 100
IDLE
3 KEYS
SCROLL
TANK REFILL
SET-UP
INVENTORY...
SET-UP FUNCTION: ?
SYSTEM CONFIGURATION
ENTER
SPECTRUM 100
IDLE
REQUIRED ACTIVITY: ?
SET-UP
ENTER
SCROLL
PIN#
FLUID IDENTIFICATION
SYSTEM CONFIG..
SET-UP FUNCTION: ?
EXIT
ENTER
REQUIRED ACTIVITY: ?
EXIT
ENTER
SCROLL
TANK REFILL
SET-UP
INVENTORY STATUS
DISPENSE LOG
SYSTEM TEST
EXIT
SCROLL
PIN#
FLUID IDENTIFICATION
SC IDENTIFICATION..
EXIT
SAVE/READ PARAMETERS: ?
SAVE read exit
ENTER
SCROLL
SAVE
READ
EXIT
WRITING SC00
1
Begin with the program at home position:
“SPECTRUM 100, IDLE”. Press the three-
key simultaneous entry for management rou-
tines (“NEW”+”ENTER”+”STATUS”)
2
The next prompt will ask you to choose
the required management activity:
“SCROLL” to highlight “SET-UP”, then press
“ENTER”.
3
The next prompt will ask you to select
a type of set-up activity: “SCROLL” to
highlight “SYSTEM CONFIGURATION”, then
press “ENTER”.
4
The display will then display “SAVE/
READ PARAMETERS” on the fi rst line
and selection choices on line 2. To save con-
sole parameters, choose “SAVE”; to recall
saved parameters into the memory of a
new or replacement console, select “READ”.
Press “ENTER” when completed.
5
The display will briefl y show the mes-
sage “WRITING TO SC00” or “READ-
ING SC00”.
7
The next prompt will ask you to select a
type of set-up activity: “SCROLL” to high-
light “EXIT”, then press “ENTER”.
8
The next prompt will ask you to choose
the required management activity:
“SCROLL” to highlight “EXIT”, then press
“ENTER”.
9
Next, the system will display “SPEC-
TRUM 100 IDLE”. The console is now
ready for other operations.
READ/WRITE SUCCESSFUL
6
If no errors occur during the process,
the display will then pause and report
the message “READ/WRITE SUCCESSFUL”.
Press “ENTER” to continue.
SAVE/READ PARAMETERS: ?
SAVE read exit
NEW
SCROLL
SAVE
READ
EXIT
ENTER
