B-K Medical Pro Focus 2202 User Manual Download Page 56

Page: 56 / 356

56 Chapter 3

Basic Keys

The Basic keys are arranged around the

[

]

keys for easy access. These keys work

in different scanning modes. For detailed information about using them, see the
chapters about the various scanning modes.

Figure 3-5. The Basic keys on the control panel.

Basic keys

Table 3-3. Function of the Basic keys on the control panel.

Basic keys

Key

Name

Key Type

Action

[

]

Freeze

Press

Freezes and unfreezes the image. See “Freezing the
Image” on page 73.

[

]

Print

Press

Starts one of the user-defined documentation functions.
For more information, see “User-Defined Keys” on
page 169.

[

]

Save

Press

Starts one of the user-defined documentation functions.
For more information, see “User-Defined Keys” on
page 169.

[

]

Cancel

Press

Cancels the present procedure or action. Works in all
scanning modes.

Please note that some of the documentation functions are only available after a patient ID has
been entered.

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands

B-K Medical Pro Focus 2202, User Manual

Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands