B-K Medical Pro Focus 2202 User Manual Download Page 294

Page: 294 / 356

294 Chapter 20

If you have not scanned the entire region of interest, reposition the transducer
and reset the scanning parameters (if required). Press

[

]

or click

Acquire to start scanning a new 3D image.

Turning 3D On and Off

NOTE:

You cannot turn on 3D if the scanned image is frozen.

To turn on 3D:

•

Press

[

]

•

Click .

You can also use set up a user-defined key (or foot-pedal switch) to start 3D. See
“User-Defined Keys” on page 169.

If you have not entered a valid patient ID, you will be prompted to do so.

NOTE:

You cannot acquire 3D data sets unless you have entered a patient ID.

The default patient ID is “NoID”.

To turn off 3D:

•

Press (long)

[

]

or the user-defined 3D key.

•

Click (long)

Setting Up the Image Capture Settings

When you turn 3D on, the 3D Acquisition window appears:

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands

B-K Medical Pro Focus 2202, User Manual

Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands