B-K Medical Pro Focus 2202 User Manual Download Page 113

Page: 113 / 356

Documentation 113

Figure 6-9. DICOM status indicator and status window.

•

Green indicates no unsent images. This times out after 5 seconds.

•

Yellow indicates that a DICOM session is in progress (data are being transferred
to a DICOM system).

•

Red indicates that some unsent images remain after a DICOM session.

If you click the indicator, the status window appears. You have the following
options:

•

Clear All – clear all pending documents

•

Retry – try to send again

•

Close – do nothing

Printing Documents

You can print documents on a local printer or, if DICOM is installed on your scanner,
send them to be printed on a DICOM printer.

Printing on a DICOM Printer

To print on a DICOM printer:

In the document browser, click to select the documents you want to print:

Click DICOM Print.

The documents are sent to a DICOM printer.

DICOM
status
indicator

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands

B-K Medical Pro Focus 2202, User Manual

Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands