B-K Medical Pro Focus 2202, User Manual

Page: 300 / 356

300 Chapter 20
3D – New, Close, Save
When you view a 3D data set, there are 3 options at the upper right side of the screen
under 3D.
•
New – Returns to the 3D Acquisition window so you can acquire a new data set.
(This option is only available when 3D is turned on – not if you are just viewing
a 3D data set from the patient archiving system.)
•
Close – Closes the 3D viewer.
•
Save – Updates the 3D volume document in the patient archiving system to
include saved User Views, measurements and the result of sculpting.
Changing the View
When a volume is displayed, a list of all the available 3D views appears on the upper
left side of the screen, under 3D View. The current view is indicated by a little green
light. To change the view, click the one you want.
NOTE:
Scanning is frozen when any view of the 3D volume is displayed.
Enhancing a 3D View
When a 3D view is displayed, you can use various options under Settings on the left
side of the screen to enhance the appearance of the 3D volume and make it easier to
see the structures you are interested in.
•
Brightness
•
Contrast
•
Hue – Click this to open a window where you can select a hue (color) to color
the gray scale part of the volume.
•
Zoom – Initial zoom is 100%. (Zoom is located above Settings on the left side
of the screen.)
Presets
After you have set Brightness, Contrast, Hue and Zoom, and any Render settings,
you can save your settings as a Preset on the right side of the screen.