B-K Medical Pro Focus 2202 User Manual Download Page 276

Page: 276 / 356

276 Chapter 18

[14] Hobbins et al. American Journal of Obstetrics and Gynecology. 1982;144:289–297.

[15] Hobbins et al. Prenatal Diagnosis of Congenital Anomalies. 1988.

[16] Jeanty, Radiology. 1983;147:319-324.

[17] Jeanty & Romero, Obstetrics Ultrasound. 1984.

[18] Kurtz AB, et al. J. Clin. Ultrasound.1980;8:319.

[19] Osaka University Journal of Fetal Growth (Japan). 1988; 37:1140-45.

[20] Persson PH, Obstetrisk Ultralyd 36 92-93 1997 (Swedish Working Group in Gynecology

ULTRAARG).

[21] Robinson H, Flemming J. British Journal of Obstetrics and Gynaecology. 1975;82:702.

[22] Shepard MJ et al. American Journal of Obstetrics and Gynecology. 1982;147:47–54.

[23] Shinozuka N et al. Jpn J Med Ultrasonics. 1996;23(12):877-888.

[24] Warsof et al., American Journal of Obstetrics and Gynecology. 1977;128:881.

[25] Williams RL et al. Obstet. Gynecol. 59 (1982), 624-632.

Summary of Contents for Pro Focus 2202





































































































































































































































































































































































Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands

B-K Medical Pro Focus 2202, User Manual

Search results

Summary of Contents for Pro Focus 2202

Reviews:

Related manuals for Pro Focus 2202

Brands by name

Popular brands