manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 67

Installing IP500/IP500 V2

Page 67

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

Administration Software: IP Office Web Manager

3.2 Installing the Admin Applications

The IP Office Administration suite consists of a number of applications for IP Office installers and
maintainers. 

·

o

 System Monitor - Install 

·

o

 Manager - Install 

·

o

 System Status Application - Install 

·

o

 Call Status - Optional

This software is not supported with IP Office Release 7.0 and higher systems. It is provided
only for the maintenance of older systems. 

Requirements

·

o

 IP Office Release 9.0 User/Admin DVD Set (2) (700506051)  

Alternatively the IP Office Administrator Applications suite can be downloaded from 

Avaya's support website

 (

http://support.avaya.com

). 

·

o

 Windows PC Requirements 

This should meet the requirements of the administrator applications being installed.  The specification below are the
minimum requirements for IP Office Manager. If other applications are to be installed on the PC then their individual
requirements should also be meet.

Requirement

Minimum

Recommended

Processor

600MHz Pentium or AMD Opteron, AMD
Athlon64, AMD Athlon XP.

800MHz Pentium or AMD Opteron, AMD
Athlon64, AMD Athlon XP.

RAM

128MB

256MB

HD Space

1GB - 800MB for .NET2, 200MB for IP Office
Manager.

1.4GB - 800MB for .NET2, 600MB for the full
IP Office Admin suite.

Display

800 x 600 - 256 Colors

1024 x 768 - 16-bit High Color

Operating
System

Supported on Windows XP Pro, Windows Vista, Windows 7, Windows 2003 and Windows 2008
R2. 

·

32-bit and 64-bit versions are supported. 

·

Vista support is only on Business, Enterprise and Ultimate versions. 

·

Windows 7 support is only on Professional, Enterprise and Ultimate versions. 

 

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands