Avaya IP500, Installation Manual

Page: 271 / 442

Installing IP500/IP500 V2 Page 271
15-601042 Issue 28c (19 August 2013) IP Office 9.0
System Components: IP400 Expansion Modules
Module Rear
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya 40W external power
supply unit supplied with the expansion module. A locale specific
IEC60320 C7 power cord for the
external PSU is required but is not supplied with the module.
DS Digital Station port. Used for connection of IP Office supported DS phones . If connected to an out-
of-building extension , the connection must be made via additional IROB barrier devices in addition
to the buildings primary protection. The module must also be connected to a protective ground.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
Ground point. Used for connection of a protective or functional ground if required. On older
modules where this screw is not present, the top-center cover screw should be used instead.
Must be connected if any
out-of-building extensions are connected to this module.
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item Variant Country SAP Code
IP400 Digital Station 16 Ports All 700184807
30 Ports 700184880
IEC60320 C7 Power Cord CEE7/16 Europe 700213382
BS1363 United Kingdom 700213374
NEMA1-15 America 700213390
Korea Korea 700254519
IP400 Rack Mounting Kit All 700210800
393
39
393 48
45
395
208
45