manualshive.com logo in svg

Avaya IP500, Installation Manual

Share
Download
Avaya IP500 Installation Manual Download Page 256

Installing IP500/IP500 V2

Page 256

15-601042 Issue 28c (19 August 2013)

IP Office 9.0

10.6.2 IP500 Smart Card

This type of feature key is used with IP500 control units and is a mandatory item. The control
unit must be fitted with one of these feature keys even if no licenses are being used. 

The serial number for licenses issued for use with this type of feature key is printed on the card
and prefixed by SN. 

Feature Key Dongle

SAP Code

Smart Card Feature Key (Mu-Law)

700417470

Smart Card Feature Key (A-Law)

700417488

·

A-Law or Mu-Law 
PCM (Pulse Code Modulation) is a method for encoding voice as data. In telephony, two
methods PCM encoding are widely used, A-law and Mu-law (also called U-law). Typically
Mu-law is used in North America and a few other locations while A-law by the rest of the
world. As well as setting the correct PCM encoding for the region, the A-Law or Mu-Law
setting of an IP Office system when it is first started affects a wide range of regional
defaults relating to line settings and other values. 

·

For IP400 IP Office systems, each control units was manufactured as either an A-Law
variant or a Mu-Law variant. 

·

For IP500 and IP500 V2 systems, the encoding default is set by the type of Feature
Key installed when the system is first started.

Summary of Contents for IP500



























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands